Cisco Asr1001-Hx= Cisco Asr1001-Hx System, 4X10ge+4X1ge, Optional Crypto+P/S Ethernet Switch Router

• Type: Wireless
• Network Site: Intermediate Node Routers
• Transfer Rate: 10/100/1000Mbps
• Firewall: Firewall
• Ports: 8
• Port Structure: Modular
• Model NO.: ASR1001-HX=
• Application: Enterprise, SOHO
• Network: WCDMA
• Performance: Line-Rate Router
• Architecture: Crossbar System
• Build-in Gigabit Ethernet Port: 4X 10g SFP Ports, 4 X 1g SFP+ Ports
• Connector Type: SFP
• RAM: 8 GB
• Esp Bandwidth: 2.5-20 Gbps
• Connectivity Technology: Wired
• Remote Management Protocol: Cli, Snmp, Telnet
• Power Supply: 85-264V
• Weight: 11.35 Kg
• Warranty: 1 Year
• Transport Package: Boxed
• Specification: 43.43 x 439.42 x 461.5 mm
• Trademark: Cisco
• Origin: China
• HS Code: 8517623600
• Production Capacity: 100 Pieces/Per Month

Product Description

Product Description

ASR1001-HX Specification

ASR1001-HX Specifications
Physical specifications Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets. Refer to the applicable hardware installation guide for additional details.	Height: 1.71 in. (43.43 mm) Width: 17.3 in. (439.42 mm) Depth: 18.17 in. (461.5 mm) Weight:   25 lb (11.35 kg) fully loaded Note: The Cisco ASR 1001-X Router has the route processor, ESP, and SIP integrated.
Default memory	8-GB DRAM shared across route processor, ESP, and SIP
Number of SIPs or Ethernet line cards supported	Integrated in chassis
Shared port adapters	1 single-height SPA slot
Ethernet port adapters	N/A
Cisco ASR 1000 Series ESP	Integrated in chassis
Route processor	Integrated in the chassis: Cisco ASR 1001-X Series Route Processor with Quad Core Processor
Redundancy	Software: Yes
Built-in Gigabit Ethernet ports	Yes: 6 Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports
Built-in 10 Gigabit Ethernet port	Yes: Two 10 Gigabit Ethernet Small Form-Factor Plus Pluggable (SFP+) ports Note:Built-in 10-GB ports cannot be reduced to 1-GB speed.
Network interface module	Yes
Cisco ASR 1000 Series	Cisco ASR 1001-X
ESP support	Cisco ASR 1000 Series 2.5-Gbps ESP (default) Upgradable through a software-activated feature license to 5, 10, or 20 Gbps
ESP bandwidth	2.5 to 20 Gbps
ESP memory	Share the same control memory on route processor
SIPs and Ethernet line cards	Integrated in chassis; not upgradable
Embedded hardware-based encryption	Yes: Up to 8-Gbps crypto support throughput
Minimum Cisco IOS XE Software release	Cisco IOS XE Software Release 3.12.0
Rack-mounting	Yes: 19-inch
Wall-mounting	No
External USB flash memory	1-GB USB flash-memory support
Redundant power supply	Yes: Dual power supplies by default; option of either AC or DC power supply Note: A mix of one AC and one DC power supply is not supported.
Power input	Worldwide ranging AC input range (85 to 264 VAC) Worldwide ranging DC (-40 to -72V; 48V nominal)
Power consumption	Maximum (DC): 242W   Maximum (AC): 250W   Maximum (out): 250W
Airflow	Front-to-back
Operating temperature (nominal)	32 to 104°F (0 to 40°C)
Operating temperature (short-term)	32 to 122°F (0 to 50°C)
Operating humidity (nominal) (relative humidity)	10 to 85%
Operating humidity (short-term)	5 to 90%
Storage temperature	-40 to 150°F (-40 to 70°C)
Storage humidity (relative humidity)	5 to 95%
Operating altitude	-500 to 10,000 feet (152 to 3048 meters)
Network Equipment Building Standards (NEBS)	GR-1089 and GR-63 (in progress)
EMC standards	FCC 47 CFR Part 15 Class A   VCCI Class A   AS/NSZ Class A   ICES-003 Class A   EN55022/CISPR 22 Information Technology Equipment (Emissions)   EN55024/CISPR 24 Information Technology Equipment (Immunity)   EN300 386 Telecommunications Network Equipment   (EMC)   EN50082-1/EN61000-6-1 Generic Immunity Standard
Safety Standard	UL60950-1 CSA C22.2 No. 60950-1-03 EN 60950-1 IEC 60950-1 AS/NZS 60950.1

 

 

Packaging & Shipping

FAQ

Q:Will the product be damaged in the course of transportation?

A:Our company can guarantee that all products will be packed in special materials before transportation.

Q:How do the goods arrive  to international buyer?

A:Goods are transported through UPS, EMS, DHL, FEDEX or express delivery company authorized by the buyer.

Q:What about the tariff?

A:As is known to all, customs duties should be borne by international buyers.

Q: What is your leading time? 

A: With ready stock leading time is 1-2weeks, if need change warranty card or user manual, the leading time will be changed.

Q: Do you accept OEM/ODM? 

A: We accept OEM, as well as a professional team for customer ODM services. 

Q: What payment methods do you accept? 

A5:Standard terms: T/T in advance. Large amount: (20% deposit +80% balance before shipping) . Small amount like sample fees: Western Union.

Our Services

our corporation promises to offer more competitive prices than our global counterparts and 24 hours of service.

Our company guarantee productions can be replaced within 90 days except for improper operation and damage caused by misapplication.

Our company is committed to providing stable, cheap, high-quality used Cisco switches for global clients as well as the business philosophy of our company is customer-oriented.