Cisco SPA-4xoc3-POS-V2 Cisco 4-Port Oc-3c/Stm-1 POS Shared Port Adapter Business Module for 1002 Series Routers

• Usage: Server
• Type: Wired
• Support Network: Ethernet
• Information content: Data
• Certification: CE, ISO, RoHS
• Condition: Used
• Model NO.: SPA-4XOC3-POS-V2
• Software Release: Cisco Ios Xe Release 3.1s
• Supported Route Processor: Cisco Router Shared Port Adapter
• Maximum Number of Spas: 4
• Supported Cisco Asr 1000 Router Chassis: Cisco 12000/Xr12000/Asr1000/Asr9000 Series Routers
• Weight: 0.34 Kg
• Warranty: 1 Year
• Transport Package: Boxed
• Specification: 2.03 X 17.15 X 18.48 MM
• Trademark: CISCO
• Origin: China
• HS Code: 8517709000
• Production Capacity: 1000 Pieces/Per Month

Product Description

 

Product Description

SPA-4XOC3-POS-V2 Specification

SPA-4XOC3-POS-V2 Specifications
Product compatibility	• Cisco 12000 Series Routers • Cisco XR 12000 Series Routers • Cisco ASR 1000 Series Router • Cisco ASR 9000 Series Router
Port density per SPA	4 ports
Physical interface	• OC-3c/STM-1 SFP optics module (refer to optical parameters in Table 2) • Visual status indicators (LEDs): • SPA status LED • Per-port LEDs • Carrier and alarm • Active and loopback
Protocols	• RFC 1662 PPP in High-Level Data Link Control (HDLC)-like framing • RFC 2615 Point-to-Point Protocol (PPP) over SONET/SDH • RFC 2427, Multiprotocol Interconnect over Frame Relay • IPv4/IPv6
Features and functions	Synchronization • Local (internal) or loop timed (recovered from network) • Pointer activity monitoring Local (diagnostic) and line (network) loopback Payload mapping • POS with 1 + X^43 self-synchronous scrambler SONET/SDH compliance • Telcordia (Bellcore) GR-253-CORE (as applicable) • ANSI T1.105, T1.231 • ITU-T G.707, G.957, G.825 (as applicable) Supported SONET/SDH alarm and signal events • Signal failure bit error rate (SF-ber) • Signal degrade bit error rate (SD-ber) • Signal label payload construction (C2) • Path trace byte (J1) • Section • Loss of signal (LoS) • Loss of frame (LoF) • Error counts for B1 • Threshold crossing alarms (TCA) for B1 • Line • Line alarm indication signal (LAIS) • Line remote defect indication (LRDI) • Line remote error indication (LREI) • Error counts for B2 • TCA for B2 • Path • Path alarm indication signal (PAIS) • Path remote defect indication (PRDI) • Path remote error indication (PREI) • Error counts for B3 • TCA for B3 • Loss of pointer (LoP) • Positive stuffing event (PSE) • Negative stuffing event (NSE) • Path unequipped indication signal (PUNEQ) • Path payload mismatch indication signal (PPLM)
Network management	• RFC 2558 MIB (SONET/SDH) • Simple Network Management Protocol (SNMP)
Reliability and availability	• Online insertion and removal (OIR) • Field-replaceable SFP optical modules • 1+1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section Protection (MSP) protocols • Single SPA software reset
Physical specifications	• Weight: 0.75 lb (0.34 kg) • Height: 0.8 in. (2.03 cm) (single height) • Width: 6.75 in. (17.15 cm) • Depth: 7.28 in. (18.49 cm)
Power	• 4-Port OC-3c/STM-1 = 6.0W (no optics)
Environmental specifications	• Operating temperature: 41 to 104°F (5 to 40°C) • Storage temperature: -38 to 150°F (-40 to 70°C) • Operating humidity: 5 to 85% relative humidity • Storage humidity: 5 to 95% relative humidity
Compliance and agency approvals	Safety • UL 60950 • CSA 22.2-No.60950 • EN60950 • IEC 60950 CB Scheme • ACA TS001 • AS/NZS 3260 • EN60825\IEC60825 laser safety (SR, IR-Class 1) (VSR-Class 1M)1 • 21CFR1040 -FDA Code of Federal Regulations (USA) laser safety (SR, IR-Class 1) (VSR-Class 1M)1 EMC • FCC Part 15 (CFR 47) • ICES 003 • EN55022 • CISPR 22 • AS/NZS CISPR22 • VCCI • EN55024 • EN50082-1 • EN61000-6-1 • EN61000-3-2 • EN61000-3-3 Network Equipment Building System (NEBS) This product is designed to meet the following requirements (official qualification may be in progress): • SR-3580-NEBS: Criteria levels (Level 3 compliant) • GR-63-Core-NEBS: Physical protection • GR-1089-Core-NEBS: EMC and safety ETSI • EN300 386/EN300 386-2 Class B • ETS 300 019 Storage Class 1.1 • ETS 300 019 Transportation Class 2.3 • ETS 300 019 Stationary Use Class 3.1

 

 

Packaging & Shipping

FAQ

Q:Will the product be damaged in the course of transportation?

A:Our company can guarantee that all products will be packed in special materials before transportation.

Q:How do the goods arrive  to international buyer?

A:Goods are transported through UPS, EMS, DHL, FEDEX or express delivery company authorized by the buyer.

Q:What about the tariff?

A:As is known to all, customs duties should be borne by international buyers.

Q: What is your leading time? 

A: With ready stock leading time is 1-2weeks, if need change warranty card or user manual, the leading time will be changed.

Q: Do you accept OEM/ODM? 

A: We accept OEM, as well as a professional team for customer ODM services. 

Q: What payment methods do you accept? 

A5:Standard terms: T/T in advance. Large amount: (20% deposit +80% balance before shipping) . Small amount like sample fees: Western Union.

Our Services

our corporation promises to offer more competitive prices than our global counterparts and 24 hours of service.

Our company guarantee productions can be replaced within 90 days except for improper operation and damage caused by misapplication.

Our company is committed to providing stable, cheap, high-quality used Cisco switches for global clients as well as the business philosophy of our company is customer-oriented.